Cheap VPS & Xen Server


Residential Proxy Network - Hourly & Monthly Packages

The Perfect Server – Debian 8 Jessie (Apache2, BIND, Dovecot, ISPConfig 3)


This tutorial shows how to prepare a Debian Jessie server (with Apache2, BIND, Dovecot) for the installation of ISPConfig 3, and how to install ISPConfig 3. The webhosting control panel ISPConfig 3 allows you to configure the following services through a web browser: Apache or nginx web server, Postfix mail server, Courier or Dovecot IMAP/POP3 server, MySQL, BIND or MyDNS nameserver, PureFTPd, SpamAssassin, ClamAV, and many more. This setup covers Apache (instead of nginx), BIND (instead of MyDNS), and Dovecot (instead of Courier).

1 Preliminary Note

In this tutorial I will use the hostname server1.example.com with the IP address 192.168.1.100 and the gateway 192.168.1.1. These settings might differ for you, so you have to replace them where appropriate. Before proceeding further you need to have a minimal installation of Debian 8. This might be a Debian minimal image from your Hosting provider or you use the Minimal Debian Server Tutorial to setup the base system.

2 Install the SSH server (Optional)

If you did not install the OpenSSH server during the system installation, you can do it now:

apt-get install ssh openssh-server

From now on you can use an SSH client such as PuTTY and connect from your workstation to your Debian Jessie server and follow the remaining steps from this tutorial.

3 Install a shell text editor (Optional)

We will use nano text editor in this tutorial. Some useres prefer the classic vi editor, therefor we will install both editors here. The default vi program has some strange behaviour on Debian and Ubuntu; to fix this, we install vim-nox:

apt-get install nano vim-nox

If vi is your favorite editor, then replace nano with vi in the following commands to edit files.

4 Configure the Hostname

The hostname of your server should be a subdomain like “server1.example.com”. Do not use a domain name without subdomain part like “example.com” as hostname as this will cause problems later with your mail setup. First you should check the hostname in /etc/hosts and change it when nescessary. The line should be: “IP Address – space – full hostname incl. domain – space – subdomain part”. For our hostname server1.example.com, the file shall look like this:

nano /etc/hosts

127.0.0.1       localhost.localdomain   localhost
192.168.1.100   server1.example.com     server1

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Then edit the /etc/hostname file:

nano /etc/hostname

It shall contain only the subdomain part, in our case:

server1

Finally reboot the server to apply the change:

reboot

Login again and check if the hostname is correct now with these commands:

hostname
hostname -f

The output shall be like this:

root@server1:/tmp# hostname
server1
root@server1:/tmp# hostname -f
server1.example.com

 

5 Update Your Debian Installation

First make sure that your /etc/apt/sources.list contains the jessie/updates repository (this makes sure you always get the newest security updates), and that the contrib and non-free repositories are enabled (some packages such as libapache2-mod-fastcgi are not in the main repository).

nano /etc/apt/sources.list

#deb cdrom:[Debian GNU/Linux 8.0.0 _Jessie_ - Official amd64 NETINST Binary-1 20150425-12:50]/ jessie main

deb http://ftp.us.debian.org/debian/ jessie main contrib non-free
deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free

deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free

Run:

apt-get update

To update the apt package database

apt-get upgrade

and to install the latest updates (if there are any).

 

6 Change The Default Shell

/bin/sh is a symlink to /bin/dash, however we need /bin/bash, not /bin/dash. Therefore we do this:

dpkg-reconfigure dash

Use dash as the default system shell (/bin/sh)? <- no

If you don’t do this, the ISPConfig installation will fail.

 

7 Synchronize the System Clock

It is a good idea to synchronize the system clock with an NTP (network time protocol) server over the Internet. Simply run

apt-get install ntp ntpdate

and your system time will always be in sync.

 

8 Install Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils

We can install Postfix, Dovecot, MySQL, rkhunter, and binutils with a single command:

apt-get install postfix postfix-mysql postfix-doc mariadb-client mariadb-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d dovecot-mysql dovecot-sieve dovecot-lmtpd sudo

When you prefer MySQL over MariaDB, replace the packages “mariadb-client mariadb-server” in the above command with “mysql-client mysql-server”.

You will be asked the following questions:

General type of mail configuration: <– Internet Site
System mail name: <– server1.example.com
New password for the MariaDB “root” user: <– yourrootsqlpassword
Repeat password for the MariaDB “root” user: <– yourrootsqlpassword

Next open the TLS/SSL and submission ports in Postfix:

nano /etc/postfix/master.cf

Uncomment the submission and smtps sections as follows and add lines where nescessary so that this section of the master.cf file looks exactly like the one below.

[...]
submission inet n - - - - smtpd
 -o syslog_name=postfix/submission
 -o smtpd_tls_security_level=encrypt
 -o smtpd_sasl_auth_enable=yes
 -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
smtps inet n - - - - smtpd
 -o syslog_name=postfix/smtps
 -o smtpd_tls_wrappermode=yes
 -o smtpd_sasl_auth_enable=yes
 -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
[...]

Restart Postfix afterwards:

service postfix restart

We want MariaDB to listen on all interfaces, not just localhost, therefore we edit /etc/mysql/my.cnf and comment out the line bind-address = 127.0.0.1:

nano /etc/mysql/my.cnf

[...]
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#bind-address           = 127.0.0.1
[...]

Then we restart MySQL:

service mysql restart

Now check that networking is enabled. Run

netstat -tap | grep mysql

The output should look like this:

root@server1:/tmp# netstat -tap | grep mysql
tcp6 0 0 [::]:mysql [::]:* LISTEN 27371/mysqld

 

9 Install Amavisd-new, SpamAssassin And Clamav

To install amavisd-new, SpamAssassin and ClamAV, we run

apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl

Edit the Clamd configuraton file /etc/clamav/clamd.conf

nano /etc/clamav/clamd.conf

and change the line AllowSupplementaryGroups from false to true:

AllowSupplementaryGroups true

The ISPConfig 3 setup uses amavisd which loads the SpamAssassin filter library internally, so we can stop SpamAssassin to free up some RAM:

service spamassassin stop
systemctl disable spamassassin

10 Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt

Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, and mcrypt can be installed as follows:

apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libruby libapache2-mod-python php5-curl php5-intl php5-memcache php5-memcached php5-pspell php5-recode php5-sqlite php5-tidy php5-xmlrpc php5-xsl memcached libapache2-mod-passenger

You will see the following questions:

Web server to reconfigure automatically: <- apache2
Configure database for phpmyadmin with dbconfig-common? <- yes
Enter the password of the administrative user? <- yourrootmysqlpassword
Enter the phpmyadmin application password? <-  Just press enter

Then run the following command to enable the Apache modules suexec, rewrite, ssl, actions, and include (plus dav, dav_fs, and auth_digest if you want to use WebDAV):

a2enmod suexec rewrite ssl actions include dav_fs dav auth_digest cgi

and enable the moduley by running:

service apache2 restart

SuPHP is not available anymore for Debian Jessie. The suphp mode should not be used anymore in ISPConfig as there are better PHP modes like php-fpm and php-fcgi available. If you really need suphp for legacy reasons, then follow the steps in this chapter to compile it manually:

apt-get install apache2-dev build-essential autoconf automake libtool flex bison debhelper binutils

cd /usr/local/src
wget http://suphp.org/download/suphp-0.7.2.tar.gz
tar zxvf suphp-0.7.2.tar.gz
wget -O suphp.patch https://lists.marsching.com/pipermail/suphp/attachments/20130520/74f3ac02/attachment.patch
patch -Np1 -d suphp-0.7.2 < suphp.patch
cd suphp-0.7.2
autoreconf -if
./configure –prefix=/usr/ –sysconfdir=/etc/suphp/ –with-apr=/usr/bin/apr-1-config –with-apache-user=www-data –with-setid-mode=owner –with-logfile=/var/log/suphp/suphp.log
make
make install

Create the suphp configuration directory and suphp.conf file:

mkdir /var/log/suphp
mkdir /etc/suphp
nano /etc/suphp/suphp.conf

[global]
;Path to logfile
logfile=/var/log/suphp/suphp.log

;Loglevel
loglevel=info

;User Apache is running as
webserver_user=www-data

;Path all scripts have to be in
docroot=/var/www

;Path to chroot() to before executing script
;chroot=/mychroot

; Security options
allow_file_group_writeable=false
allow_file_others_writeable=false
allow_directory_group_writeable=false
allow_directory_others_writeable=false

;Check wheter script is within DOCUMENT_ROOT
check_vhost_docroot=true

;Send minor error messages to browser
errors_to_browser=false

;PATH environment variable
env_path=/bin:/usr/bin

;Umask to set, specify in octal notation
umask=0022

; Minimum UID
min_uid=100

; Minimum GID
min_gid=100


[handlers]
;Handler for php-scripts
x-httpd-suphp="php:/usr/bin/php-cgi"

;Handler for CGI-scripts
x-suphp-cgi=execute:!self
umask=0022

Next we will add a config file to load the suphp module in apache:

echo “LoadModule suphp_module /usr/lib/apache2/modules/mod_suphp.so” > /etc/apache2/mods-available/suphp.load

And then open /etc/apache2/mods-available/suphp.conf

nano /etc/apache2/mods-available/suphp.conf

… and add the following content:

<IfModule mod_suphp.c>
        AddType application/x-httpd-suphp .php .php3 .php4 .php5 .phtml
        suPHP_AddHandler application/x-httpd-suphp

    <Directory />
        suPHP_Engine on
    </Directory>

    # By default, disable suPHP for debian packaged web applications as files
    # are owned by root and cannot be executed by suPHP because of min_uid.
    <Directory /usr/share>
        suPHP_Engine off
    </Directory>

# # Use a specific php config file (a dir which contains a php.ini file)
#       suPHP_ConfigPath /etc/php5/cgi/suphp/
# # Tells mod_suphp NOT to handle requests with the type <mime-type>.
#       suPHP_RemoveHandler <mime-type>
</IfModule>

Enable the suphp module in apache:

a2enmod suphp

Restart Apache afterwards:

service apache2 restart

12 XCache and PHP-FPM

XCache is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It’s similar to other PHP opcode cachers, such as eAccelerator and APC. It is strongly recommended to have one of these installed to speed up your PHP page.

XCache can be installed as follows:

apt-get install php5-xcache

Now restart Apache:

service apache2 restart

 

12.2 PHP-FPM

Starting with ISPConfig 3.0.5, there is an additional PHP mode that you can select for usage with Apache: PHP-FPM.

To use PHP-FPM with Apache, we need the mod_fastcgi Apache module (please don’t mix this up with mod_fcgid – they are very similar, but you cannot use PHP-FPM with mod_fcgid). We can install PHP-FPM and mod_fastcgi as follows:

apt-get install libapache2-mod-fastcgi php5-fpm

Make sure you enable the module and restart Apache:

a2enmod actions fastcgi alias
service apache2 restart

 

13 Install Mailman

ISPConfig allows you to manage (create/modify/delete) Mailman mailing lists. If you want to make use of this feature, install Mailman as follows:

apt-get install mailman

Select at least one language, e.g.:

Languages to support: <– en (English)
Missing site list <– Ok

Before we can start Mailman, a first mailing list called mailman must be created:

newlist mailman

root@server1:~# newlist mailman
Enter the email of the person running the list: <– admin email address, e.g. listadmin@example.com
Initial mailman password: <– admin password for the mailman list
To finish creating your mailing list, you must edit your /etc/aliases (or
equivalent) file by adding the following lines, and possibly running the
`newaliases’ program:

## mailman mailing list
mailman:              “|/var/lib/mailman/mail/mailman post mailman”
mailman-admin:        “|/var/lib/mailman/mail/mailman admin mailman”
mailman-bounces:      “|/var/lib/mailman/mail/mailman bounces mailman”
mailman-confirm:      “|/var/lib/mailman/mail/mailman confirm mailman”
mailman-join:         “|/var/lib/mailman/mail/mailman join mailman”
mailman-leave:        “|/var/lib/mailman/mail/mailman leave mailman”
mailman-owner:        “|/var/lib/mailman/mail/mailman owner mailman”
mailman-request:      “|/var/lib/mailman/mail/mailman request mailman”
mailman-subscribe:    “|/var/lib/mailman/mail/mailman subscribe mailman”
mailman-unsubscribe:  “|/var/lib/mailman/mail/mailman unsubscribe mailman”

Hit enter to notify mailman owner… <– ENTER

root@server1:~#

Open /etc/aliases afterwards…

vi /etc/aliases

… and add the following lines:

[...]
## mailman mailing list
mailman:              "|/var/lib/mailman/mail/mailman post mailman"
mailman-admin:        "|/var/lib/mailman/mail/mailman admin mailman"
mailman-bounces:      "|/var/lib/mailman/mail/mailman bounces mailman"
mailman-confirm:      "|/var/lib/mailman/mail/mailman confirm mailman"
mailman-join:         "|/var/lib/mailman/mail/mailman join mailman"
mailman-leave:        "|/var/lib/mailman/mail/mailman leave mailman"
mailman-owner:        "|/var/lib/mailman/mail/mailman owner mailman"
mailman-request:      "|/var/lib/mailman/mail/mailman request mailman"
mailman-subscribe:    "|/var/lib/mailman/mail/mailman subscribe mailman"
mailman-unsubscribe:  "|/var/lib/mailman/mail/mailman unsubscribe mailman"

Run

newaliases

afterwards and restart Postfix:

service postfix restart

Finally we must enable the Mailman Apache configuration:

ln -s /etc/mailman/apache.conf /etc/apache2/conf-enabled/mailman.conf

This defines the alias /cgi-bin/mailman/ for all Apache vhosts, which means you can access the Mailman admin interface for a list at http://server1.example.com/cgi-bin/mailman/admin/, and the web page for users of a mailing list can be found at http://server1.example.com/cgi-bin/mailman/listinfo/.

Under http://server1.example.com/pipermail you can find the mailing list archives.

Restart Apache afterwards:

service apache2 restart

Then start the Mailman daemon:

service mailman start

 

14 Install PureFTPd And Quota

PureFTPd and quota can be installed with the following command:

apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool

Edit the file /etc/default/pure-ftpd-common

nano /etc/default/pure-ftpd-common

… and make sure that the start mode is set to standalone and set VIRTUALCHROOT=true:

[...]
STANDALONE_OR_INETD=standalone
[...]
VIRTUALCHROOT=true
[...]

Now we configure PureFTPd to allow FTP and TLS sessions. FTP is a very insecure protocol because all passwords and all data are transferred in clear text. By using TLS, the whole communication can be encrypted, thus making FTP much more secure.

If you want to allow FTP and TLS sessions, run

echo 1 > /etc/pure-ftpd/conf/TLS

In order to use TLS, we must create an SSL certificate. I create it in /etc/ssl/private/, therefore I create that directory first:

mkdir -p /etc/ssl/private/

Afterwards, we can generate the SSL certificate as follows:

openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/pure-ftpd.pem -out /etc/ssl/private/pure-ftpd.pem

Country Name (2 letter code) [AU]: <– Enter your Country Name (e.g., “DE”).
State or Province Name (full name) [Some-State]: <– Enter your State or Province Name.
Locality Name (eg, city) []: <– Enter your City.
Organization Name (eg, company) [Internet Widgits Pty Ltd]: <– Enter your Organization Name (e.g., the name of your company).
Organizational Unit Name (eg, section) []: <– Enter your Organizational Unit Name (e.g. “IT Department”).
Common Name (eg, YOUR name) []: <– Enter the Fully Qualified Domain Name of the system (e.g. “server1.example.com”).
Email Address []: <– Enter your Email Address.

Change the permissions of the SSL certificate:

chmod 600 /etc/ssl/private/pure-ftpd.pem

Then restart PureFTPd:

service pure-ftpd-mysql restart

Edit /etc/fstab. Mine looks like this (I added ,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 to the partition with the mount point /):

nano /etc/fstab

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=3dc3b58d-97e5-497b-8254-a913fdfc5408 / ext4 errors=remount-ro,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 0 1
# swap was on /dev/sda5 during installation
UUID=36bf486e-8f76-492d-89af-5a8eb3ce8a02 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0

To enable quota, run these commands:

mount -o remount /

quotacheck -avugm
quotaon -avug

 

15 Install BIND DNS Server

BIND can be installed as follows:

apt-get install bind9 dnsutils

 

16 Install Vlogger, Webalizer, And AWStats

Vlogger, Webalizer, and AWStats can be installed as follows:

apt-get install vlogger webalizer awstats geoip-database libclass-dbi-mysql-perl

Open /etc/cron.d/awstats afterwards…

nano /etc/cron.d/awstats

… and comment out everything in that file:

#MAILTO=root

#*/10 * * * * www-data [ -x /usr/share/awstats/tools/update.sh ] && /usr/share/awstats/tools/update.sh

# Generate static reports:
#10 03 * * * www-data [ -x /usr/share/awstats/tools/buildstatic.sh ] && /usr/share/awstats/tools/buildstatic.sh

 

17 Install Jailkit

Jailkit is needed only if you want to chroot SSH users. It can be installed as follows (important: Jailkit must be installed before ISPConfig – it cannot be installed afterwards!):

apt-get install build-essential autoconf automake libtool flex bison debhelper binutils

cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.17.tar.gz
tar xvfz jailkit-2.17.tar.gz
cd jailkit-2.17
./debian/rules binary

You can now install the Jailkit .deb package as follows:

cd ..
dpkg -i jailkit_2.17-1_*.deb
rm -rf jailkit-2.17*

 

18 Install fail2ban

This is optional but recommended, because the ISPConfig monitor tries to show the log:

apt-get install fail2ban

To make fail2ban monitor PureFTPd and Dovecot, create the file /etc/fail2ban/jail.local:

nano /etc/fail2ban/jail.local

 

[pureftpd]
enabled  = true
port     = ftp
filter   = pureftpd
logpath  = /var/log/syslog
maxretry = 3

[dovecot-pop3imap]
enabled = true
filter = dovecot-pop3imap
action = iptables-multiport[name=dovecot-pop3imap, port="pop3,pop3s,imap,imaps", protocol=tcp]
logpath = /var/log/mail.log
maxretry = 5

[postfix-sasl]
enabled  = true
port     = smtp
filter   = postfix-sasl
logpath  = /var/log/mail.log
maxretry = 3

Then create the following two filter files:

nano /etc/fail2ban/filter.d/pureftpd.conf

[Definition]
failregex = .*pure-ftpd: \(.*@<HOST>\) \[WARNING\] Authentication failed for user.*
ignoreregex =

nano /etc/fail2ban/filter.d/dovecot-pop3imap.conf

[Definition]
failregex = (?: pop3-login|imap-login): .*(?:Authentication failure|Aborted login \(auth failed|Aborted login \(tried to use disabled|Disconnected \(auth failed|Aborted login \(\d+ authentication attempts).*rip=(?P<host>\S*),.*
ignoreregex =

Then, to add the ignoreregex line in the postfix-sasl filter file, run:

echo “ignoreregex =” >> /etc/fail2ban/filter.d/postfix-sasl.conf

Restart fail2ban afterwards:

service fail2ban restart

19 Install squirrelmail

To install the SquirrelMail webmail client, run

apt-get install squirrelmail

Then configure SquirrelMail:

squirrelmail-configure

We must tell SquirrelMail that we are using Dovecot-IMAP/-POP3:

SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu —
1.  Organization Preferences
2.  Server Settings
3.  Folder Defaults
4.  General Options
5.  Themes
6.  Address Books
7.  Message of the Day (MOTD)
8.  Plugins
9.  Database
10. Languages

D.  Set pre-defined settings for specific IMAP servers

C   Turn color on
S   Save data
Q   Quit

Command >> <– D

SquirrelMail Configuration : Read: config.php
———————————————————
While we have been building SquirrelMail, we have discovered some
preferences that work better with some servers that don’t work so
well with others.  If you select your IMAP server, this option will
set some pre-defined settings for that server.

Please note that you will still need to go through and make sure
everything is correct.  This does not change everything.  There are
only a few settings that this will change.

Please select your IMAP server:
bincimap    = Binc IMAP server
courier     = Courier IMAP server
cyrus       = Cyrus IMAP server
dovecot     = Dovecot Secure IMAP server
exchange    = Microsoft Exchange IMAP server
hmailserver = hMailServer
macosx      = Mac OS X Mailserver
mercury32   = Mercury/32
uw          = University of Washington’s IMAP server
gmail       = IMAP access to Google mail (Gmail) accounts

quit        = Do not change anything
Command >> <– dovecot

SquirrelMail Configuration : Read: config.php
———————————————————
While we have been building SquirrelMail, we have discovered some
preferences that work better with some servers that don’t work so
well with others.  If you select your IMAP server, this option will
set some pre-defined settings for that server.

Please note that you will still need to go through and make sure
everything is correct.  This does not change everything.  There are
only a few settings that this will change.

Please select your IMAP server:
bincimap    = Binc IMAP server
courier     = Courier IMAP server
cyrus       = Cyrus IMAP server
dovecot     = Dovecot Secure IMAP server
exchange    = Microsoft Exchange IMAP server
hmailserver = hMailServer
macosx      = Mac OS X Mailserver
mercury32   = Mercury/32
uw          = University of Washington’s IMAP server
gmail       = IMAP access to Google mail (Gmail) accounts

quit        = Do not change anything
Command >> dovecot

imap_server_type = dovecot
default_folder_prefix =
trash_folder = Trash
sent_folder = Sent
draft_folder = Drafts
show_prefix_option = false
default_sub_of_inbox = false
show_contain_subfolders_option = false
optional_delimiter = detect
delete_folder = false

Press any key to continue… <– press a key

SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu —
1.  Organization Preferences
2.  Server Settings
3.  Folder Defaults
4.  General Options
5.  Themes
6.  Address Books
7.  Message of the Day (MOTD)
8.  Plugins
9.  Database
10. Languages

D.  Set pre-defined settings for specific IMAP servers

C   Turn color on
S   Save data
Q   Quit

Command >> <– S

SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu —
1.  Organization Preferences
2.  Server Settings
3.  Folder Defaults
4.  General Options
5.  Themes
6.  Address Books
7.  Message of the Day (MOTD)
8.  Plugins
9.  Database
10. Languages

D.  Set pre-defined settings for specific IMAP servers

C   Turn color on
S   Save data
Q   Quit

Command >> <– Q

Now we will configure SquirrelMail so that you can use it from within your web sites (created through ISPConfig) by using the /squirrelmail or /webmail aliases. So if your website is www.example.com, you will be able to access SquirrelMail using www.example.com/squirrelmail or www.example.com/webmail.

SquirrelMail’s Apache configuration is in the file /etc/squirrelmail/apache.conf, but this file isn’t loaded by Apache because it is not in the /etc/apache2/conf.d/ directory. Therefore we create a symlink called squirrelmail.conf in the /etc/apache2/conf.d/ directory that points to /etc/squirrelmail/apache.conf and reload Apache afterwards:

cd /etc/apache2/conf-enabled/
ln -s ../../squirrelmail/apache.conf squirrelmail.conf
service apache2 reload

Now open /etc/apache2/conf-enabled/squirrelmail.conf

nano /etc/apache2/conf-enabled/squirrelmail.conf

… and add the following lines to the container to make sure that mod_php is used for accessing SquirrelMail, regardless of what PHP mode you select for your website in ISPConfig:

 

[...]
<Directory /usr/share/squirrelmail>
  Options FollowSymLinks
  <IfModule mod_php5.c>
    AddType application/x-httpd-php .php
    php_flag magic_quotes_gpc Off
    php_flag track_vars On
    php_admin_flag allow_url_fopen Off
    php_value include_path .
    php_admin_value upload_tmp_dir /var/lib/squirrelmail/tmp
    php_admin_value open_basedir /usr/share/squirrelmail:/etc/squirrelmail:/var/lib/squirrelmail:/etc/hostname:/etc/mailname
    php_flag register_globals off
  </IfModule>
  <IfModule mod_dir.c>
    DirectoryIndex index.php
  </IfModule>

  # access to configtest is limited by default to prevent information leak
  <Files configtest.php>
    order deny,allow
    deny from all
    allow from 127.0.0.1
  </Files>
</Directory>
[...]

Create the directory /var/lib/squirrelmail/tmp

mkdir /var/lib/squirrelmail/tmp

… and make it owned by the user www-data:

chown www-data /var/lib/squirrelmail/tmp

Reload Apache again:

service apache2 reload

That’s it already – /etc/apache2/conf-enabled/squirrelmail.conf defines an alias called /squirrelmail that points to SquirrelMail’s installation directory /usr/share/squirrelmail.

You can now access SquirrelMail from your web site as follows:

http://192.168.0.100/squirrelmail
http://www.example.com/squirrelmail

You can also access it from the ISPConfig control panel vhost (after you have installed ISPConfig, see the next chapter) as follows (this doesn’t need any configuration in ISPConfig):

http://server1.example.com:8080/squirrelmail

If you’d like to use the alias /webmail instead of /squirrelmail, simply open /etc/apache2/conf-enabled/squirrelmail.conf

nano /etc/apache2/conf-enabled/squirrelmail.conf

… and add the line Alias /webmail /usr/share/squirrelmail:

Alias /squirrelmail /usr/share/squirrelmail
Alias /webmail /usr/share/squirrelmail
[...]

Then reload Apache:

service apache2 reload

Now you can access Squirrelmail as follows:

http://192.168.1.100/webmail
http://www.example.com/webmail
http://server1.example.com:8080/webmail
(after you have installed ISPConfig, see the next chapter)

37

If you’d like to define a vhost like webmail.example.com where your users can access SquirrelMail, you’d have to add the following vhost configuration to /etc/apache2/conf-enabled/squirrelmail.conf:

vi /etc/apache2/conf-enabled/squirrelmail.conf

[...]
<VirtualHost *:80>
  DocumentRoot /usr/share/squirrelmail
  ServerName webmail.example.com
</VirtualHost>

Of course, there must be a DNS record for webmail.example.com that points to the IP address that you use in the vhost configuration. Also make sure that the vhost webmail.example.com does not exist in ISPConfig (otherwise both vhosts will interfere with each other!).

Now reload Apache…

/etc/init.d/apache2 reload

… and you can access SquirrelMail under http://webmail.example.com!

 

20 Install ISPConfig 3

To install ISPConfig 3 from the latest released version, do this:

cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3-stable.tar.gz
tar xfz ISPConfig-3-stable.tar.gz
cd ispconfig3_install/install/

The next step is to run

php -q install.php

This will start the ISPConfig 3 installer. The installer will configure all services like Postfix, Dovecot, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary.

NOTE: Do not be alarmed that the ISPConfig 3 installer identifies Debian Jessie as unknown version. This does not interfere with any functionality and will be fixed with the next ISPConfig update.

root@server1:/tmp/ispconfig3_install/install# php -q install.php
PHP Deprecated:  Comments starting with ‘#’ are deprecated in /etc/php5/cli/conf.d/ming.ini on line 1 in Unknown on line 0

——————————————————————————–
_____ ___________   _____              __ _         ____
|_   _/  ___| ___ \ /  __ \            / _(_)       /__  \
| | \ `–.| |_/ / | /  \/ ___  _ __ | |_ _  __ _    _/ /
| |  `–. \  __/  | |    / _ \| ‘_ \|  _| |/ _` |  |_ |
_| |_/\__/ / |     | \__/\ (_) | | | | | | | (_| | ___\ \
\___/\____/\_|      \____/\___/|_| |_|_| |_|\__, | \____/
__/ |
|___/
——————————————————————————–

>> Initial configuration

Operating System: Debian or compatible, unknown version.

Following will be a few questions for primary configuration so be careful.
Default values are in [brackets] and can be accepted with .
Tap in “quit” (without the quotes) to stop the installer.

Select language (en,de) [en]: <– ENTER

Installation mode (standard,expert) [standard]: <– ENTER

Full qualified hostname (FQDN) of the server, eg server1.domain.tld  [server1.example.com]: <– ENTER

MySQL server hostname [localhost]: <– ENTER

MySQL root username [root]: <– ENTER

MySQL root password []: <– yourrootsqlpassword

MySQL database to create [dbispconfig]: <– ENTER

MySQL charset [utf8]: <– ENTER

Generating a 4096 bit RSA private key
…………………………………………………….++
………………………………………………………………………………………………………….++
writing new private key to ‘smtpd.key’
—–
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter ‘.’, the field will be left blank.
—–
Country Name (2 letter code) [AU]: <– ENTER
State or Province Name (full name) [Some-State]: <– ENTER
Locality Name (eg, city) []: <– ENTER
Organization Name (eg, company) [Internet Widgits Pty Ltd]: <– ENTER
Organizational Unit Name (eg, section) []: <– ENTER
Common Name (e.g. server FQDN or YOUR name) []: <– ENTER
Email Address []: <– ENTER
Configuring Jailkit
Configuring Dovecot
Configuring Spamassassin
Configuring Amavisd
Configuring Getmail
Configuring Pureftpd
Configuring BIND
Configuring Apache
Configuring Vlogger
Configuring Apps vhost
Configuring Bastille Firewall
Configuring Fail2ban
Installing ISPConfig
ISPConfig Port [8080]: <– ENTER

Do you want a secure (SSL) connection to the ISPConfig web interface (y,n) [y]: <– ENTER

Generating RSA private key, 4096 bit long modulus
…………………………………………………………………………………….++
……..++
e is 65537 (0x10001)
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter ‘.’, the field will be left blank.
—–
Country Name (2 letter code) [AU]: <– ENTER
State or Province Name (full name) [Some-State]: <– ENTER
Locality Name (eg, city) []: <– ENTER
Organization Name (eg, company) [Internet Widgits Pty Ltd]: <– ENTER
Organizational Unit Name (eg, section) []: <– ENTER
Common Name (e.g. server FQDN or YOUR name) []: <– ENTER
Email Address []: <– ENTER

Please enter the following ‘extra’ attributes
to be sent with your certificate request
A challenge password []: <– ENTER
An optional company name []: <– ENTER
writing RSA key
Configuring DBServer
Installing ISPConfig crontab
no crontab for root
no crontab for getmail
Restarting services …
Stopping MySQL database server: mysqld.
Starting MySQL database server: mysqld ..
Checking for tables which need an upgrade, are corrupt or were
not closed cleanly..
Stopping Postfix Mail Transport Agent: postfix.
Starting Postfix Mail Transport Agent: postfix.
Stopping amavisd: amavisd-new.
Starting amavisd: amavisd-new.
Stopping ClamAV daemon: clamd.
Starting ClamAV daemon: clamd .
Restarting IMAP/POP3 mail server: dovecot.
[Tue May 07 02:36:22 2013] [warn] NameVirtualHost *:443 has no VirtualHosts
[Tue May 07 02:36:22 2013] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue May 07 02:36:23 2013] [warn] NameVirtualHost *:443 has no VirtualHosts
[Tue May 07 02:36:23 2013] [warn] NameVirtualHost *:80 has no VirtualHosts
Restarting web server: apache2 … waiting .
Restarting ftp server: Running: /usr/sbin/pure-ftpd-mysql-virtualchroot -l mysql:/etc/pure-ftpd/db/mysql.conf -l pam -H -O clf:/var/log/pure-ftpd/transfer.log -Y 1 -D -u 1000 -A -E -b -8 UTF-8 -B
Installation completed.
root@server1:/tmp/ispconfig3_install/install#

The installer automatically configures all underlying services, so no manual configuration is needed.

You now also have the possibility to let the installer create an SSL vhost for the ISPConfig control panel, so that ISPConfig can be accessed using https:// instead of http://. To achieve this, just press ENTER when you see this question: Do you want a secure (SSL) connection to the ISPConfig web interface (y,n) [y]:.

Afterwards you can access ISPConfig 3 under http(s)://server1.example.com:8080/ or http(s)://192.168.0.100:8080/ ( http or https depends on what you chose during installation). Log in with the username admin and the password admin (you should change the default password after your first login):

38

39

The system is now ready to be used.

 

 

21 Additional Notes

21.1 OpenVZ

If the Debian server that you’ve just set up in this tutorial is an OpenVZ container (virtual machine), you should do this on the host system (I’m assuming that the ID of the OpenVZ container is 101 – replace it with the correct VPSID on your system):

VPSID=101
for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
do
vzctl set $VPSID –capability ${CAP}:on –save
done

 

  • Debian: http://www.debian.org/
  • ISPConfig: http://www.ispconfig.org/

 

Comments

comments