Cheap VPS & Xen Server


Residential Proxy Network - Hourly & Monthly Packages

Virtual Hosting With Proftpd And MySQL (Incl. Quota) On Fedora 11


This document describes how to install a Proftpd server that uses virtual users from a MySQL database instead of real system users. This is much more performant and allows to have thousands of ftp users on a single machine. In addition to that I will show the use of quota with this setup.

For the administration of the MySQL database you can use web based tools like phpMyAdmin which will also be installed in this howto. phpMyAdmin is a comfortable graphical interface which means you do not have to mess around with the command line.

This tutorial is based on Fedora 11. You should already have set up a basic Fedora 11 system, for example as described in the first five chapters of this tutorial: http://www.Kreationnext.com/perfect-server-fedora-11-x86_64-ispconfig-2

This howto is meant as a practical guide; it does not cover the theoretical backgrounds. They are treated in a lot of other documents in the web.

This document comes without warranty of any kind! I want to say that this is not the only way of setting up such a system. There are many ways of achieving this goal but this is the way I take. I do not issue any guarantee that this will work for you!

 

1 Preliminary Note

In this tutorial I use the hostname server1.example.com with the IP address 192.168.0.100. These settings might differ for you, so you have to replace them where appropriate.

 

2 Install MySQL And phpMyAdmin

This can all be installed with one single command:

yum install mysql mysql-server phpMyAdmin httpd

Afterwards, we must edit the file /etc/httpd/conf.d/phpMyAdmin.conf to make phpMyAdmin accessible from all IP addresses. By default, it’s accessible only from 127.0.0.1. Comment out this section:

<Directory /usr/share/phpMyAdmin/>
order deny,allow
deny from all
allow from 127.0.0.1
allow from ::1
</Directory>

so that the file looks like this:

vi /etc/httpd/conf.d/phpMyAdmin.conf

# phpMyAdmin - Web based MySQL browser written in php
#
# Allows only localhost by default
#
# But allowing phpMyAdmin to anyone other than localhost should be considered
# dangerous unless properly secured by SSL

Alias /phpMyAdmin /usr/share/phpMyAdmin
Alias /phpmyadmin /usr/share/phpMyAdmin
#<Directory /usr/share/phpMyAdmin/>
#   order deny,allow
#   deny from all
#   allow from 127.0.0.1
#   allow from ::1
#</Directory>

# This directory does not require access over HTTP - taken from the original
# phpMyAdmin upstream tarball
#
<Directory /usr/share/phpMyAdmin/libraries>
    Order Deny,Allow
    Deny from All
    Allow from None
</Directory>

# This configuration prevents mod_security at phpMyAdmin directories from
# filtering SQL etc.  This may break your mod_security implementation.
#
#<IfModule mod_security.c>
#    <Directory /usr/share/phpMyAdmin>
#        SecRuleInheritance Off
#    </Directory>
#</IfModule>

Then we create the system startup links for MySQL and Apache (so that both start automatically whenever the system boots) and start both services:

chkconfig –levels 235 mysqld on
/etc/init.d/mysqld start

chkconfig –levels 235 httpd on
/etc/init.d/httpd start

Create a password for the MySQL user root (replace yourrootsqlpassword with the password you want to use):

mysqladmin -u root password yourrootsqlpassword
mysqladmin -h server1.example.com -u root password yourrootsqlpassword

 

3 Install Proftpd With MySQL Support

For Fedora there is a pre-configured proftpd-mysql package available. Install it like this:

yum install proftpd-mysql

Then we create an ftp group (ftpgroup) and user (ftpuser) that all our virtual users will be mapped to. Replace the group- and userid 2001 with a number that is free on your system:

groupadd -g 2001 ftpgroup
useradd -u 2001 -s /bin/false -d /bin/null -c “proftpd user” -g ftpgroup ftpuser

 

4 Create The MySQL Database For Proftpd

Now we create a database called ftp and a MySQL user named proftpd which the proftpd daemon will use later on to connect to the ftp database:

mysql -u root -p

create database ftp;
GRANT SELECT, INSERT, UPDATE, DELETE ON ftp.* TO ‘proftpd’@’localhost’ IDENTIFIED BY ‘password’;
GRANT SELECT, INSERT, UPDATE, DELETE ON ftp.* TO ‘proftpd’@’localhost.localdomain’ IDENTIFIED BY ‘password’;
FLUSH PRIVILEGES;

Replace the string password with whatever password you want to use for the MySQL user proftpd. Still on the MySQL shell, we create the database tables we need:

USE ftp;

CREATE TABLE ftpgroup (
groupname varchar(16) NOT NULL default ”,
gid smallint(6) NOT NULL default ‘5500’,
members varchar(16) NOT NULL default ”,
KEY groupname (groupname)
) TYPE=MyISAM COMMENT=’ProFTP group table’;

CREATE TABLE ftpquotalimits (
name varchar(30) default NULL,
quota_type enum(‘user’,’group’,’class’,’all’) NOT NULL default ‘user’,
per_session enum(‘false’,’true’) NOT NULL default ‘false’,
limit_type enum(‘soft’,’hard’) NOT NULL default ‘soft’,
bytes_in_avail int(10) unsigned NOT NULL default ‘0’,
bytes_out_avail int(10) unsigned NOT NULL default ‘0’,
bytes_xfer_avail int(10) unsigned NOT NULL default ‘0’,
files_in_avail int(10) unsigned NOT NULL default ‘0’,
files_out_avail int(10) unsigned NOT NULL default ‘0’,
files_xfer_avail int(10) unsigned NOT NULL default ‘0’
) TYPE=MyISAM;

CREATE TABLE ftpquotatallies (
name varchar(30) NOT NULL default ”,
quota_type enum(‘user’,’group’,’class’,’all’) NOT NULL default ‘user’,
bytes_in_used int(10) unsigned NOT NULL default ‘0’,
bytes_out_used int(10) unsigned NOT NULL default ‘0’,
bytes_xfer_used int(10) unsigned NOT NULL default ‘0’,
files_in_used int(10) unsigned NOT NULL default ‘0’,
files_out_used int(10) unsigned NOT NULL default ‘0’,
files_xfer_used int(10) unsigned NOT NULL default ‘0’
) TYPE=MyISAM;

CREATE TABLE ftpuser (
id int(10) unsigned NOT NULL auto_increment,
userid varchar(32) NOT NULL default ”,
passwd varchar(32) NOT NULL default ”,
uid smallint(6) NOT NULL default ‘5500’,
gid smallint(6) NOT NULL default ‘5500’,
homedir varchar(255) NOT NULL default ”,
shell varchar(16) NOT NULL default ‘/sbin/nologin’,
count int(11) NOT NULL default ‘0’,
accessed datetime NOT NULL default ‘0000-00-00 00:00:00’,
modified datetime NOT NULL default ‘0000-00-00 00:00:00′,
PRIMARY KEY (id),
UNIQUE KEY userid (userid)
) TYPE=MyISAM COMMENT=’ProFTP user table’;

quit;

As you may have noticed, with the quit; command we have left the MySQL shell and are back on the Linux shell.

BTW, (I’m assuming that the hostname of your ftp server system is server1.example.com) you can access phpMyAdmin under http://server1.example.com/phpmyadmin/ (you can use the IP address instead of server1.example.com) in a browser and log in as proftpd. Then you can have a look at the database. Later on you can use phpMyAdmin to manage your Proftpd server.

5 Configure Proftpd

Open /etc/proftpd.conf and comment out the AuthPAMConfig and AuthOrder lines:

vi /etc/proftpd.conf

[...]
# Use pam to authenticate (default) and be authoritative
#AuthPAMConfig                  proftpd
#AuthOrder                      mod_auth_pam.c* mod_auth_unix.c
[...]

Further down in same file, add the following lines right below the

# Define the log formats
LogFormat                       default “%h %l %u %t \”%r\” %s %b”
LogFormat                       auth    “%v [%P] %h %t \”%r\” %s”

stanza:

[...]
LoadModule mod_sql.c
LoadModule mod_sql_mysql.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_sql.c


SQLBackend              mysql
# The passwords in MySQL are encrypted using CRYPT
SQLAuthTypes            Plaintext Crypt
SQLAuthenticate         users groups


# used to connect to the database
# databasename@host database_user user_password
SQLConnectInfo  ftp@localhost proftpd password


# Here we tell ProFTPd the names of the database columns in the "usertable"
# we want it to interact with. Match the names with those in the db
SQLUserInfo     ftpuser userid passwd uid gid homedir shell

# Here we tell ProFTPd the names of the database columns in the "grouptable"
# we want it to interact with. Again the names match with those in the db
SQLGroupInfo    ftpgroup groupname gid members

# set min UID and GID - otherwise these are 999 each
SQLMinID        500

# create a user's home directory on demand if it doesn't exist
CreateHome on

# Update count every time user logs in
SQLLog PASS updatecount
SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser

# Update modified everytime user uploads or deletes a file
SQLLog  STOR,DELE modified
SQLNamedQuery modified UPDATE "modified=now() WHERE userid='%u'" ftpuser

# User quotas
# ===========
QuotaEngine on
QuotaDirectoryTally on
QuotaDisplayUnits Mb
QuotaShowQuotas on

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM ftpquotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"

SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM ftpquotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"

SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" ftpquotatallies

SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" ftpquotatallies

QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally

RootLogin off
RequireValidShell off
[...]

Make sure that you replace the string password with the real password for the MySQL user proftpd in the line SQLConnectInfo!

Then we create the system startup links for Proftpd and start it:

chkconfig –levels 235 proftpd on
/etc/init.d/proftpd start

 

6 Populate The Database And Test

To populate the database you can use the MySQL shell:

mysql -u root -p

USE ftp;

First we create an entry in the table ftpgroup. It contains the groupname, the groupid and the username of the ftp group/user we created at the end of step two (replace the groupid appropriately if you use another one than 2001):

INSERT INTO `ftpgroup` (`groupname`, `gid`, `members`) VALUES (‘ftpgroup’, 2001, ‘ftpuser’);

Now we are done with the table ftpgroup. We do not have to create further entries here. Whenever you create a new virtual ftp user, you do this in the tables ftpquotalimits and ftpuser. So let us create our first user exampleuser with a quota of 15MB and the password secret (we are still in the MySQL shell):

INSERT INTO `ftpquotalimits` (`name`, `quota_type`, `per_session`, `limit_type`, `bytes_in_avail`, `bytes_out_avail`, `bytes_xfer_avail`, `files_in_avail`, `files_out_avail`, `files_xfer_avail`) VALUES (‘exampleuser’, ‘user’, ‘true’, ‘hard’, 15728640, 0, 0, 0, 0, 0);

INSERT INTO `ftpuser` (`id`, `userid`, `passwd`, `uid`, `gid`, `homedir`, `shell`, `count`, `accessed`, `modified`) VALUES (1, ‘exampleuser’, ‘secret’, 2001, 2001, ‘/home/www.example.com’, ‘/sbin/nologin’, 0, ”, ”);

quit;

(Do not forget to replace the group- and userid 2001 appropriately in the last INSERT statement if you are using other values than in this tutorial!)

Now open your FTP client program on your work station (something like WS_FTP or SmartFTP if you are on a Windows system or gFTP on a Linux desktop) and try to connect. As hostname you use server1.example.com (or the IP address of the system), the username is exampleuser, and the password is secret.

If you are able to connect – congratulations! If not, something went wrong.

Now, if you run

ls -l /home/

you should see that the directory /home/www.example.com (exampleuser‘s home directory) has been automatically created, and it is owned by ftpuser and ftpgroup (the user/group we created at the end of step two):

[root@server1 log]# ls -l /home/
total 4
drwx—— 2 ftpuser ftpgroup 4096 2009-10-13 19:23 www.example.com
[root@server1 log]#

 

7 Database Administration

For most people it is easier if they have a graphical front-end to MySQL; therefore you can also use phpMyAdmin (in this example under http://server1.example.com/phpmyadmin/) to administrate the ftp database.

1

Whenever you create a new user, you only have to create entries in the tables ftpquotalimits and ftpuser so I will explain the columns of these tables here:

ftpuser Table:

The important columns are these (the others are handled by MySQL or Proftpd automatically, so do not fill these manually!):

  • userid: The name of the virtual Proftpd user (e.g. exampleuser).
  • passwd: The unencrypted (i.e., clear-text) password of the user.
  • uid: The userid of the ftp user you created at the end of step two (e.g. 2001).
  • gid: The groupid of the ftp group you created at the end of step two (e.g. 2001).
  • homedir: The home directory of the virtual Proftpd user (e.g. /home/www.example.com). If it does not exist, it will be created when the new user logs in the first time via FTP. The virtual user will be jailed into this home directory, i.e., he cannot access other directories outside his home directory.
  • shell: It is ok if you fill in /sbin/nologin here by default.

ftpquotalimits Table:

The important columns are these (the others are handled by MySQL or Proftpd automatically, so do not fill these manually!):

  • name: The name of the virtual Proftpd user (e.g. exampleuser).
  • quota_type: user or group. Normally, we use user here.
  • per_session: true or false. true means the quota limits are valid only for a session. For example, if the user has a quota of 15 MB, and he has uploaded 15 MB during the current session, then he cannot upload anything more. But if he logs out and in again, he again has 15 MB available. false means, that the user has 15 MB, no matter if he logs out and in again.
  • limit_type: hard or soft. A hard quota limit is a never-to-exceed limit, while a soft quota can be temporarily exceeded. Normally you use hard here.
  • bytes_in_avail: Upload limit in bytes (e.g. 15728640 for 15 MB). 0 means unlimited.
  • bytes_out_avail: Download limit in bytes. 0 means unlimited.
  • bytes_xfer_avail: Transfer limit in bytes. The sum of uploads and downloads a user is allowed to do. 0 means unlimited.
  • files_in_avail: Upload limit in files. 0 means unlimited.
  • files_out_avail: Download limit in files. 0 means unlimited.
  • files_xfer_avail: Tranfer limit in files. 0 means unlimited.

The ftpquotatallies table is used by Proftpd internally to manage quotas so you do not have to make entries there!

 

8 References

Mandrake 10.1 – Proftpd + MySQL authentication + Quotas Howto: http://www.khoosys.net/single.htm?ipg=848

 

  • Proftpd: http://www.proftpd.org/
  • MySQL: http://www.mysql.com/
  • phpMyAdmin: http://www.phpmyadmin.net/
  • Fedora: http://fedoraproject.org/

Comments

comments